Products

Braskem America

PlasticsProduct Families

Basic Thermoplastics

Polymer Additives

34 Products found on Braskem America in Plastics

SDSWith SDS

TDSWith TDS

Braskem AmericaBraskem America CP360H

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Extrusion, Injection Molding, Spunbond Nonwovens, Fibers Extrusion, High-speed Fiber Spinning
Melt Flow Index:34.0 - 34.0 g/10 min

Braskem CP360H polypropylene homopolymer is a high melt flow rate homopolymer designed for spunbond nonwoven production. This resin features an excellent processability allowing increased line speed or air pressure as well as gains of mechanical properties. The narrow molecular weight distribution AGF stability and tight gel control provide its unique performance.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaUTEC® 3041

Average Molecular Weight:3000000.0 - 3000000.0 g/mol
Average Particle Size:160.0 - 160.0 microns
Processing Methods:Compression Molding, Ram Extrusion
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 3041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem Inspire 6123EN

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Extrusion, Thermoforming
Melt Flow Index:2.0 - 2.0 g/10 min

Braskem INSPIRE 6123EN polypropylene random copolymer resin (RCP) is a high performance nucleated polypropylene with great balance of clarity and physical properties

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America D115A

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Injection Molding, Film Extrusion, Fibers Extrusion, Compounding
Melt Flow Index:11.0 - 11.0 g/10 min

Braskem D115A polypropylene homopolymer is a multi purpose HPP offering excellent color and processing stability. Applications and suggested uses include housewares, patio furniture, closures and process with UL Approved (USA and Canada).

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America 6D20

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Stretch Films Extrusion, Film Extrusion, Compounding, Blow Molding
Melt Flow Index:1.9 - 1.9 g/10 min

Braskem 6D20 is a polypropylene random copolymer offering consistent processability, good regrind, good gloss and clarity, low odor and taste transfer.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America RP 650

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Thermoforming, Blow Molding, Extrusion
Additives Included:Nucleating Agent
Melt Flow Index:2.0 - 2.0 g/10 min

Braskem RP 650 polypropylene random copolymer (RCP) provides high flexural modulus, superior esthetics, and enhanced optical properties.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSBF0323/12HC

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Film Extrusion, Blown Film Extrusion, Extrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:0.32 - 0.32 g/10 min

SBF0323/12HC is a high molecular weight LDPE produced using high-pressure technology. This grade is tailored to deliver exceptional performance in film applications. Films produced with this product exhibit remarkable optical properties, excellent mechanical properties, and good shrinkage characteristics. With a minimum biobased carbon content of 95%, determined according to ASTM D6866, SBF0323/12HC also stands as an environmentally conscious choice for sustainable solutions.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSBC818

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion, Extrusion Coating, Film Extrusion
Melt Flow Index:8.3 - 8.3 g/10 min

SBC818 is a low-density polyethylene specially formulated for coating processes. This grade exhibits excellent optical properties, minimal neck-in during processing, film stability, and strong adhesion on porous substrates. It does not contain any additives. Moreover, it has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSGF4950HS

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Tubing Extrusion, Extrusion Blow Molding (EBM), Compression Molding, Blow Molding
Melt Flow Index:20.0 - 20.0 g/10 min

SGF4950HS is a High Density Polyethylene copolymer that provides a remarkable combination of good processability and excellent stress cracking resistance (ESCR). It is highly recommended for manufacturing containers, flasks, and bottles up to 30 liters for transporting chemical products. This grade has a minimum biobased carbon content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSHC7260LS-L

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:7.2 - 7.2 g/10 min

SHC7260LS-L is a high-density polyethylene specially developed for injection molding applications. It offers high hardness and stiffness while exhibiting a low tendency to warp. This resin contains additives to protect against the damaging effects of ultraviolet radiation. With a minimum biobased carbon content of 94%, determined by ASTM D6866, this grade aligns with sustainable practices.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSPB208

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion, Injection Molding
Melt Flow Index:22.0 - 22.0 g/10 min

SPB208 is a low density polyethylene (LDPE) specially designed for injection molding applications. With excellent processability and low viscosity during processing, it is ideal for products that require flexibility. This grade is additives-free and boasts a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSGE7252NS

Polymer Name:Bimodal HDPE
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:2.0 - 2.0 g/10 min

SGE7252NS is a bimodal high density polyethylene designed specifically for manufacturing caps and closures for carbonated soft drinks. This grade offers a well-balanced combination of chemical and mechanical resistance, along with good processability. It contains a minimum biobased content of 96%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSTN7006

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Blow Molding, Extrusion, Profile Extrusion, Film Extrusion, Coextrusion
Melt Flow Index:0.6 - 0.6 g/10 min

STN7006 is a low-density polyethylene (LDPE) designed specifically for coextruded films and lamination. This resin offers a remarkable combination of mechanical, optical, and stiffness properties. With low gels content, it ensures the production of films with excellent appearance. STN7006 is identified as PE 114 per ASTM D-4976-04a standard specifications and is free from additives. Notably, this grade contains a minimum of 95% carbon biobased content, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSEB853

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Cast Film Extrusion, Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion, Film Extrusion
Melt Flow Index:2.7 - 2.7 g/10 min

SEB853 is a low density polyethylene produced using high-pressure technology. This grade is specifically designed for film applications. Films made with SEB853 exhibit exceptional optical properties, excellent sealability, and low gel content. Additionally, this product is free from additives. With a minimum carbon biobased content of 95%, as determined by ASTM D6866, SEB853 aligns with sustainable practices.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America RP 350

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Injection Molding
Melt Flow Index:12.0 - 12.0 g/10 min

Braskem RP 350 polypropylene random copolymer (RCP) offers processing stability, low odor, good flow with set-up behavior, superior clarity, esthetics and enhanced optical properties and excellent mold release.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Show

of 34 results