Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Industries
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions C14 Content min. 95 % ASTM D 6866 - Control Properties
Value Units Test Method / Conditions Melt Flow Rate (at 190°C, 2.16kg) 0.21 g/10 min ASTM D1238 Density 0.951 g/cm³ ASTM D792 - Typical Properties - Plaque Properties
Value Units Test Method / Conditions Melt Flow Rate (at 190°C, 21.6kg) 20 g/10 min ASTM D 1238 Tensile Strength (at Yield) ᵃ 25 MPa ASTM D 638 Tensile Strength (at Break) ᵃ 35 MPa ASTM D 638 Flexural Modulus (1% Secant) ᵇ 1100 MPa ASTM D 790 Tensile Impact Strength (at 23°C) 110 kJ/m² ISO 8256 Deflection Temperature Under Load (at 0.455 MPa) ᵇ 70 °C ASTM D 648 FNCT 300 min Braskem Method - Note
Typical properties correspond to average values obtained in our laboratories. Test specimens prepared from compression molded sheet made according to ASTM D 4703. Thickness of test piece: a) 2 mm; b) 3 mm.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards