Products

Braskem America A-80 is a thermoplastic hydrocarbon resin C9 obtained through catalytic polymerization of hydrocarbons in a continuous process. These light yellow pellets exhibit hydrophobic characteristics and are compatible with various solvents and polymeric materials. In rubbers, A-80, also known as Unilene, enhances processability, filler incorporation, dispersion, and mass adhesion, preventing elastomer degradation and reducing preparation time. In Solvent and Hot Melt adhesives, this resin promotes good adhesion, cohesion, excellent open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America A-100 is a thermoplastic hydrocarbon resin C9 obtained through catalytic polymerization of hydrocarbons in a continuous process. These light yellow pellets exhibit hydrophobic characteristics and are compatible with various solvents and polymeric materials. In rubber applications, A-100, also known as Unilene, enhances processability, filler incorporation, dispersion, and adhesion, preventing elastomer degradation and reducing preparation time. In Solvent and Hot Melt adhesives, this resin promotes excellent adhesion, cohesion, open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America B-120 LN is a hydrocarbon resin obtained through catalytic polymerization in a continuous process. It comes in light yellow pellet form and exhibits hydrophobic characteristics. Compatible with various solvents and polymeric materials, Unilene® B-120 LN has a controlled naphthalene content, resulting in a less noticeable odor compared to regular C9 hydrocarbon resins. In rubber applications, it enhances processability, filler incorporation, dispersion, and adhesion, while preventing elastomer degradation and reducing preparation time. For solvent and hot melt adhesives, the resin provides excellent adhesion, cohesion, extended open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America B-100 is a thermoplastic hydrocarbon resin C9 obtained through catalytic polymerization of hydrocarbons in a continuous process. These light yellow pellets exhibit hydrophobic characteristics and are compatible with various solvents and polymeric materials. In rubbers, B-100, also known as Unilene, enhances processability, filler incorporation, dispersion, and mass adhesion, preventing elastomer degradation and reducing preparation time. In Solvent and Hot Melt adhesives, this resin promotes good adhesion, cohesion, excellent open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America B-100 LN is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin obtained through catalytic polymerization. It comes in a pearl-like shape with a yellow colored scale. Compatible with most solvents and polymeric materials, it has a controlled naphthalene content, reducing odor compared to regular C9 hydrocarbon resins. In rubbers, Unilene ® B-100 LN improves processability, dispersion, tack, and filler incorporation, while avoiding elastomer deterioration. In hot melt and solvent-based adhesives, it promotes tack, wetting, cohesion, open time control, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America BS-140 is a hydrophobic thermoplastic hydrocarbon resin obtained through the catalytic polymerization of hydrocarbons in a continuous process. It is presented in the form of light yellow pellets and exhibits compatibility with a wide range of solvents and polymeric materials. When added to rubbers, Unilene enhances processability, filler incorporation, dispersion, and mass adhesion, effectively preventing elastomer degradation and reducing preparation time. In applications such as Solvent and Hot Melt adhesives, this resin facilitates good adhesion, cohesion, excellent open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America A-100 LN is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin obtained through catalytic polymerization in a continuous process, pastillated in a pearl-like shape, and presented in a yellow colored scale. Compatible with most solvents and polymeric materials. Unilene A-100 LN has a controlled naphthalene content, which allows for a less pronounced odor when compared to regular C9 hydrocarbon resins. In Rubbers, Unilene improves the processability of compounds, filler incorporation, dispersion, and tack of the mixture, avoiding elastomer deterioration and reducing the preparation time. For applications in Hot Melt and solvent-based Adhesives, the resin promotes tack, wetting, cohesion, open time control, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America B-110 is a thermoplastic hydrocarbon resin obtained through catalytic polymerization of hydrocarbons in a continuous process. These light yellow pellets exhibit hydrophobic characteristics and are compatible with most solvents and polymeric materials. In rubber applications, Unilene enhances processability, filler incorporation, dispersion, and mass adhesion, preventing elastomer degradation and reducing preparation time. Moreover, in Solvent and Hot Melt adhesives, this resin promotes good adhesion, cohesion, excellent open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America B-120 is a hydrophobic thermoplastic hydrocarbon resin obtained through catalytic polymerization of hydrocarbons in a continuous process. These light yellow pellets are compatible with most solvents and polymeric materials. In rubber applications, Unilene B-120 enhances processability, filler incorporation, dispersion, and mass adhesion, preventing elastomer degradation and reducing preparation time. Additionally, in Solvent and Hot Melt adhesives, the resin promotes good adhesion, cohesion, excellent open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America BS-130 is a hydrophobic thermoplastic hydrocarbon resin derived from the catalytic polymerization of hydrocarbons in a continuous process. It appears in the form of light yellow pellets and is compatible with most solvents and polymeric materials. Unilene, when incorporated in rubbers, enhances processability, filler incorporation, dispersion, and mass adhesion, thereby preventing elastomer degradation and reducing preparation time. Moreover, in Solvent and Hot Melt adhesives, this resin facilitates good adhesion, cohesion, excellent open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America B-110 LN is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin obtained through catalytic polymerization in a continuous process. It comes in a pearl-like shape and has a yellow colored scale. Compatible with most solvents and polymeric materials, Unilene ® B-110 LN has a controlled naphthalene content, resulting in a less pronounced odor compared to regular C9 hydrocarbon resins. In rubbers, it enhances processability, dispersion, tack, and filler incorporation, preventing elastomer deterioration and reducing preparation time. For applications in hot melt and solvent-based adhesives, the resin promotes tack, wetting, cohesion, open time control, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America A-90 is a thermoplastic hydrocarbon resin C9 obtained through catalytic polymerization of hydrocarbons in a continuous process. These light yellow pellets possess hydrophobic characteristics and are compatible with various solvents and polymeric materials. In rubbers, A-90, also known as Unilene, enhances processability, filler incorporation, dispersion, and mass adhesion, preventing elastomer degradation and reducing preparation time. Additionally, in Solvent and Hot Melt adhesives, the resin promotes good adhesion, cohesion, excellent open time, and water repellency.

For more information regarding REACH, please visit Braskem's site

Braskem America A-90 LN is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin obtained through catalytic polymerization in a continuous process, pastillated in a pearl-like shape, and presented in a yellow colored scale. Compatible with most solvents and polymeric materials. Unilene A-90 LN has a controlled naphthalene content, which allows for a less pronounced odor when compared to regular C9 hydrocarbon resins. In Rubbers, Unilene improves the processability of compounds, filler incorporation, dispersion, and tack of the mixture, avoiding elastomer deterioration and reducing the preparation time. For applications in Hot Melt and solvent-based Adhesives, the resin promotes tack, wetting, cohesion, open time control, and water repellency.

For more information regarding REACH, please visit Braskem's site