Visit braskem.com/usa
Braskem America logo

SLL318

1 of 38 products in this brand
SLL318 is a linear low density polyethylene, copolymer of butene-1, developed specifically for cast film extrusion applications. Films produced with this product exhibit excellent mechanical properties and enhanced sealability. With a minimum biobased carbon content of 87%, as determined by ASTM D6866, this grade aligns with sustainable practices. Additionally, it contains oxidant additives to further enhance its performance.

For more information regarding REACH, please visit Braskem's REACH site

Polymer Name: Linear Low Density Polyethylene (LLDPE)

Processing Methods: Cast Film Extrusion, Extrusion, Film Extrusion

Additives Included: Antioxidant

Melt Flow Index:: 2.7 g/10 min

Technical Data SheetSafety Data Sheet

Ask Braskem America Questions

Abbey Kugel avatarJerry O'Grady avatarKirstie Conkey avatar
View All Documents

Enhanced TDS

Identification & Functionality

Additives Included
Antioxidant
Chemical Family
Polyethylenes,
Polyolefins
Polymer Name
Linear Low Density Polyethylene (LLDPE)
Plastics & Elastomers Functions
Resin
Technologies
Plastics
Product Families
Plastics — Basic Thermoplastics
Polyolefins

Features & Benefits

Labeling Claims
Bio-based,
Low Carbon Footprint (PCF),
Sustainable,
Sustainable Polyethylene
Materials Features
Excellent Sealability,
Good Mechanical Properties,
Low Carbon Content

Applications & Uses

Markets
Electrical & Electronics
Applications
Electrical & Electronics — Wire & Cable
Jacketing & Insulation
Industries
Films
Applications
Films — Cast Films
Compatible Polymers & Resins
High-Density Polyethylene (HDPE),
Low-Density Polyethylene (LDPE),
Polyethylene Cross-Linked (PEX)
Plastics & Elastomers End Uses
Electrical Insulation,
Film,
Liners,
Pipes,
Stretch Films
Plastics & Elastomers Processing Methods
Cast Film Extrusion,
Extrusion,
Film Extrusion

Properties

Blown Film Properties
ValueUnitsTest Method / Conditions
Tensile Strength (at Break, MD)30MPaASTM D882
Tensile Strength (at Break, TD)30MPaASTM D882
Elongation (at Break, MD)1220%ASTM D882
Elongation (at Break, TD)1440%ASTM D882
Tensile Modulus (1% Secant, MD)180MPaASTM D882
Tensile Modulus (1% Secant, TD)200MPaASTM D882
Dart Drop Impact Strength90g/F50ASTM D1709
Elmendorf Tear Strength (MD)120gFASTM D1922
Elmendorf Tear Strength (TD)340gFASTM D1922
Control Properties
ValueUnitsTest Method / Conditions
Melt Flow Rate (at 190°C, 2.16kg)2.7g/10 minASTM D1238
Density0.918g/cm³ASTM D1505
Note

Blown Film Properties:

  • Film with 38 microns produce in a 40mm extruder and a blow‐up ratio of 2.2:1. (MD = extrusion direction and TD = transversal direction).

Regulatory & Compliance

Certifications & Compliance
EC No.1907/2006
Quality Standards
In Preview