Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Industries
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Control Properties
Value Units Test Method / Conditions Melt Flow Rate (at 190°C, 2.16kg) 1 g/10 min ASTM D1238 Density 0.918 g/cm³ ASTM D 792 - Typical Properties - Blown Film Properties
Value Units Test Method / Conditions Tensile Strength (at Break, MD) 40 MPa ASTM D 882 Tensile Strength (at Break, TD) 30 MPa ASTM D 882 Elongation (at Break, MD) 1100 % ASTM D 882 Elongation (at Break, TD) 1400 % ASTM D 882 Tensile Modulus (1% Secant, MD) 170 MPa ASTM D 882 Tensile Modulus (1% Secant, TD) 200 MPa ASTM D 882 Elmendorf Tear Strength (MD) 100 gF ASTM D 1922 Elmendorf Tear Strength (TD) 400 gF ASTM D 1922 Dart Drop Impact Strength 120 gF ASTM D 1709/A Haze 10 % ASTM D 1003 Gloss (Angle 60°) 110 % ASTM D 2457 - Note
- Typical Properties - Blown Film Properties
- (a) Film with 40 microns produce in a 40mm extruder and a blow‐up ra o of 2.2:1.
- (MD = extrusion direc on and TD =transversal direc on).
- Typical Properties - Blown Film Properties
Regulatory & Compliance
- Chemical Inventories
- Quality Standards