Braskem America LDF0085

Braskem America LDF0085 is a low density polyethylene (LDPE) in pellet form, designed for blown film extrusion. It excels in providing good optical properties and optimal processability. This resin yields films with very low gel content, ensuring excellent appearance. Ideal for personal care applications, specifically for baby diapers' back sheet and shrink films. TSCA exempted in the USA.

For more information regarding REACH, please visit Braskem's REACH site

Polymer Name: Low Density Polyethylene (LDPE)

Processing Methods: Blown Film Extrusion, Extrusion, Film Extrusion

Melt Flow Index:: 0.8 g/10 min

Technical Data Sheet Safety Data Sheet Regulatory Information Sheet

Ask Braskem America Questions

View All Documents

Enhanced TDS

Properties

Physical Form

Pellets,

Solid

Typical Properties


	Value	Units	Test Method / Conditions
Tensile Strength (at Break, MD)	27	MPa	ASTM D 882
Tensile Strength (at Break, TD)	20	MPa	ASTM D 882
Strain (at Break, MD)	285	%	ASTM D 882
Strain (at Break, TD)	590	%	ASTM D 882
Elasticity Modulus (Secant 1%, MD)	178	MPa	ASTM D 882
Elasticity Modulus (Secant 1%, TD)	180	MPa	ASTM D 882
Elmendorf Tear Strength (TD)	250	gF	ASTM D 1922
Dart Drop Impact Strength	160	gF	ASTM D 1709/A
Haze	8	%	ASTM D 1003

Control Properties


	Value	Units	Test Method / Conditions
Melt Flow Rate (at 190°C, 2.16kg)	0.8	g/10 min	ASTM D 1238
Density	0.923	g/cm³	ASTM D 792

Note

Film properties were tested with a monolayer 50 μm thickness blown film, blow-up ratio: 2.8, die gap: 1.8 mm. The optimum processing conditions will vary according to the type of equipment used and cannot be considered a performance guarantee.

Regulatory & Compliance

Chemical Inventories: TSCA (USA),
TSCA Exempt (USA)
Quality Standards: In Preview

Braskem America LDF0085

Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Properties

Regulatory & Compliance